|
If your lifting application
requires exact load positioning or you work in cramped quarters, a ratchet lever hoist may be just what
you need. Ideal for moving or spotting heavy machinery, pulling utility lines taut, stretching cables
or fencing, our ratchet lever hoists are also ideal for holding steel structural members in place or
welding, and for setting pipes, meters, etc.. in manholes and trenches. We offer ratchet lever hoists
in a variety of models and capacities.
|
| ¾ to 15 ton capacities |
| Light and portable or
rugged malleable iron |
| Screw and disc type load brake |
| Link and roller chain models |
| Certain
models require less handle pull to lift full load |
| 20° minimum lever stroke for operation in
cramped quarters |
| Chain free-wheels for fast hook-ups |
| Water resistant load brake |
|
|
Designed for long, dependable service,
hand hoists are up to 95% efficient. Available in hook type, plain or geared trolley type or close
headroom plain or geared trolley types.
|
| One piece suspension frame cast from high strength
aluminum alloy |
| Die cast aluminum hand chain guide and cover eliminates jamming of the hand chain |
| Forged steel top and bottom hooks are designed to be fracture resistant |
| Optional load limiter is
available |
| Load brake is screw and disc type to provide instant brake and release action for improved
control and safety |
| Capacities to 50 tons |
| Available in steel construction ideally suited for
special applications where chemical & gases are present |
|
|
Our compact hoists are
designed for economical, industrial duty. Standard features include a solid state starting switch for
greater reliability, a five-pocket load sheave for smoother lifting, and multiple disc motor brake for
positive load holding and spotting. Also standard are universal lug, totally enclosed, non-ventilated
hoist motor, mechanical overload protection device, ergonomic push button station and chain end stop
assembly.
|
| Rated loads from ¼ to 2 ton, with 10, 15, and 20-foot standard lifts |
| Available
Voltages: Single Phase - 115/230, three phase - 230/460, 208, 380, 415, 757; 60 hertz standard and 40
hertz available |
| Two-Speed Hoist models are optional with 3 to 1 speed ratio, three-phase, single
voltage only |
| Plain or motorized trolley suspensions |
| Wrap-around side plates |
| Precision trolley
wheels |
|
|
Air hoists are ideal for many
applications and conditions that make electric hoists uneconomical or impractical to operate. Air
hoists are precise, with infinitely variable speed control. Expensive electric controls are not
necessary to get precision load spotting capabilities. Air hoists perform well where heat may be a
problem, such as electroplating operations and foundries. Air hoists also perform well in chemical
industries because there is no danger of electrical sparking. Their compact construction make them
ideal for use in areas with restricted space.
|
| Capacities & Lift: Rated loads of ¼, ½, and 1 ton
with 10-foot standard lift |
| Controls: Pull cord provides a lightweight, economical option for
accurate control of loads. Pendant throttle provides one-hand control for ease of operation |
| Chain
options: Link-type or roller-type load chains |
| Suspension: Swivel top and bottom hooks with safety
latches standard; Rigid top hook, lug, plain, geared, and air motor trolleys available |
| Motor: 8-vane
motor provides high torque, smooth starting and excellent load control |
| Limit stops: prevent
over-travel in upper and lowering directions |
| Brake: Heavy-duty shoe-type with proven design for
stopping holding loads |
| Air Supply: Inlet size: 3/8' NPTF, Supply hose: ½' I.D. min., Exhaust: ½"
NPTF, Consumption: 48 SCFM at 90 PSI |
|
|
These wire rope
hoists are ideally suited for virtually any lifting application. Their wide range of capacities, lifts,
hoisting speeds, and control options make it possible to select the most efficient hoist for the job
without wasted capacity or overkill. Standard features include welded steel frames, precision machined
gearing and push button controls.
|
| ½ to 35 ton capacity |
| Hoist duty rated motors |
| Fabricated
steel frames and drums |
| Single or true vertical lift |
| Disc-type motor brake |
| Roller-clutch load
brake |
| Limiting switches |
| Oil bath lubrication |
|
|
Air powered wire rope
hoists contain motors sealed against dust, moisture and corrosive gases which makes them well-suited to
many grain, coal and chemical operations. Air hoists also perform well where heat may be a problem.
|
| Capacities from ½ to 35 tons |
| Standard are close headroom models available |
| Four suspension
options including lug, plain, geared or motorized trolley |
| Cord or lever pendant control |
| Two
brakes |
| Two limit switches |
| Full range of accessories available |
|
