|
Ideal for furniture dollies, bakery racks, laundry carts - These casters are well suited for various light duty applications and are as dependable as they are economical.
Capacities from 90 to 300 pounds. |
| Top Plate & Yoke: Heavily embossed, formed steel for strength and durability |
| Swivel Section: Single ball bearing raceway for free swiveling under load |
| Axle: All wheels run directly on axle |
| Finish: All parts except wheel are zinc plated to resist rust and corrosion. |
| Bearings: All wheels are furnished with economical plain bore. |
| Brake: Available on swivel caster |
| Wheels: Soft rubber, polyolefin or hard rubber |
|
|
Ideal for service dollies, warehouse trucks and shop carts - These casters are cold forged steel and are recommended for medium to medium heavy-duty applications.
Capacities from 140 to 1250 pounds. |
| Top Plate & Yoke: Cold forged from 1/4" steel plate. Yoke base is notched for factory or field-installable 4-position swivel lock |
| Swivel Section: Smooth formed, hardened double ball bearing raceways minimize ball indentation and wear |
| Legs: 1/4" steel, formed to increase strength and welded to yoke base |
| King Bolt: 5/8" diameter orbitally spun steel rivet |
| Axle: 1/2" diameter hollow axle complete with lock nut with straight roller and ball bearings. Axle is solid with Delrin and Oilex bearings |
| Wheel Seals: Nylon seal retaining/thrust washers |
| Lubrication: Zerk fitting in swivel section and in recessed head of hollow axle on straight roller and ball bearing wheels |
| Finish: All parts except wheel are zinc plated. Metal wheel parts have aluminum enamel paint |
|
|
Ideal for movable racks, conveyor or dragline operations, utility trucks, corrugated box trucks, caster mounted production jigs and fixtures. Manufactured from cold-forged steel, this series comes highly recommended for use on heavy-duty applications.
Capacities from 325 to 1,400 pounds. |
| Top Plate: Cold forged from 1/4" steel plate to provide the strongest possible section for swivel bearing |
| Swivel Section: 3-1/4" diameter load race. Raceways are coined smooth then heat treated to minimize ball indentation and wear |
| Legs: 1/4" steel formed to increase strength and welded to the yoke base |
| King bolt: 3/4" diameter orbitally spun steel rivet |
| Axle: 1/2" diameter hollow axle with recessed zerk fitting and lock nut on straight roller and ball bearing. Solid axle on Delrin and Oilex bearings |
| Lubrication: Zerk fitting in swivel section and in recessed head of hollow axle with straight roller bearing wheels |
| Finish: All parts except wheel are zinc plated to resist corrosion and rust. Metal wheels have air dried enamel paint |
|
|
Ideal for dough troughs, platform trucks, tow line, utility carts, tooling fixtures, scrap metal carriers. Well-suited to any type of power-towed applications where impact and shock loading cause failure in conventional king bolt and nut swivel casters
Capacities from 350 to 2,000 pounds |
| Top Plate: 1/4" AISI 1045 steel one-piece forging precision machined for long life |
| Yoke Base: AISI 1023 tubing hardend to 50 Rockwell |
| Swivel Section: 3/8" ball bearings mounted in a precision machined raceway |
| Legs: 1/4" steel welded to yoke base using 100,000 psi weld filler |
| Axle: 1/2" diameter hollow axle with lock nut on straight roller bearing, abd solid axle on Delrin and Oilex bearings |
| Rig Finish: All parts are zinc plated for maximum corrosion resistance |
|
|
Ideal for portable medical equipment, computer equipment, shock sensitive loads. Designed with the load in mind, this caster protects from damaging shocks or unwanted vibration and movement. Noise levels are reduced through the dampening effect of these casters
Capacities from 400 to 500 pounds |
| Load Springs: Rated capacity loads will deflect regularly furnished springs approximately 50%. Different load springs for each series permits wide variation in ride softness. They can be preloaded to obtain various degrees of deflection |
| Top Plate & Yoke Base: Made from 1/4" steel plate and unnotched |
| Swivel Section: Smooth formed, hardened double ball bearing raceways minimize ball indentation and wear |
| Legs: 1/4" steel formed to increase strength and welded to the yoke base |
| King Bolt: 5/8" diameter orbitally spun steel rivet |
| Axle: 1/2" diameter hollow axle complete with lock nut for straight roller and ball bearing. Axle is solid with Delrin and Oilex bearings |
| Wheel Seals: Nylon seal retaining/thrust washers |
|
