|
Durable cast iron offers a tensile
strength of 30000psi. A cost-effective solution for high capacity, abrasion resistance, and
long-wearing life.
|
| Capacities: 300 - 8,000 pounds |
|
|
Hot forged from carbon steel
billets providing enhanced ductility and tensile strength for very heavy load requirements.
|
| Capacities: 1,400 to 20,000 pounds |
|
|
Cushion tread is vulcanized to iron core,
providing excellent floor protection, quiet operation, and load protection.
|
| Capacities:
140 to 2,800 pounds. |
|
|
Wheels are molded with heavy macerated
cotton denim, impregnated with Phenolic resin under pressure and temperature. Offers floor protection,
non-marking treads, excellent load capacity, and high shock resistance.
|
| Capacities: 300
to 8,000 pounds |
|
|
Recommended for the greatest protection
to floor and load. May be foam filled.
|
| Capacities: 285 to 2,340 pounds |
|
|
Injection molded from a blend of
thermoplastic polymers, which resist absorption of water, most chemicals and solvents.
Capacity
ratings are comparable to hard rubber wheels with the added advantage of being lighter in weight and
having greater impact resistance. |
| Capacity Ratings: Comparable to hard rubber wheels yet
lighter |
|
|
Polyurethane wheels are composed of
polyurethane elastomer, open cast or injection molded on clean, close tolerance cores. Cores are either
cast iron or aluminum. Polyurethane tread is chemically bonded to the core.
High capacity
polyurethane is wear resistant and floor protective. |
| Capacities: 420 to 8400 pounds |
|
|
These wheels offer excellent washdown
properties where needed. Tread is mechanically locked to the core to prevent separations. Polyurethane
wheels offer greater load capacity than rubber. Protect flows resist chemicals, acids, caustics and
oils, rugged polypropylene hub will not break, stain, or fade.
|
| Capacities: 420 to 8400
pounds |
|
|
The solid rubber wheels have a cushion
rubber tread molded to a hard rubber center providing superior floor protection.
Sturdy wheels
through years of continous use. |
|
|
|
These wheels offer a wheel face and
"V"-groove which are machined from heavy section cast iron, drop-forged steel or solid polyurethane.
A relief groove at the base of the "V" tends to equalize the load to each face of the angle track when
in operations. |
| Capacities: 800 to 15,000 pounds |
|
|
Identical to the standard
Ultimate wheel with a rounded tread allowing a smaller contact area with the floor. Ideal for carpeted
areas and easy steering. This wheel is the ultimate ergonomic problem solver.
This multi-purpose
wheel is composed of a thermoplastic elastomer tread permanently bonded to a polyolefin core with a
spoked hub design. Resistant to chemicals, water and steam, it remains flexible in low temperatures. |
| Capacities: 350 to 675 pounds |
|
|
Designed specifically for
high-capacity manual operations involving chemicals, solvents, or water.
Extremely low rolling
resistance provides the ergonomic qualities you demand. |
| Capacities: 1000 to 1400 pounds |
|
